Styleworx Raised towbar brackets to suit 2021 MAZDA BT50 - 2021 ISUZU DMAX

Styleworx raised towbar brackets to suit 2021 MAZDA BT50 & 2021 ISUZU DMAX

CAD designed and laser cut out of 10mm 350MPA steel, our brackets will increase the departure angle of your BT50 and DMAX . These Styleworx brackets are the perfect modification for tub chops or tray back vehciles. It raises the bar 120mm and pushes it 80mm further back from the stock location. 

These brackets use all factory mounting points as it mimics the factory bracket. The chassis tab is slotted and welded with the same technique. These brackets only work with the factory tow bar. These brackets are an aftermarket product, this product is NOT manufactured by MAZDA or ISUZU . 

Our brackets have been designed as a visual modification to lift the tow bar in line with the chassis rails.

The brackets have an inbuilt recovery point.**
The brackets utilizes many design cues that the factory  brackets used to ensure it meets, if not exceeds structural integrity.** (Factory brackets are 8mm steel plate whereas our brackets are 10mm plate. Due to the bracket moving the fulcrum point of the tow bar, it is advised you contact an engineer to certify this modification.)
The brackets will be powder coated satin black. Some slight design improvements may be made prior to shipping to customers. 

**NOTE: The built in recovery points are not rated recovery points. Styleworx accepts no liability for injury or damage caused to persons or vehicles as a result of any product failure associated with or in connection to these brackets. By purchasing these brackets, you expressly acknowledge the existence of this exclusion clause and accept that it is solely your responsibility to ensure this product is used in a safe and cautious manner, and that the onus for any injury or damage caused to persons or vehicles is solely your responsibility.
Styleworx strongly recommends that you seek advice from an accredit engineer before using this product for its intended purpose.**